How Motor Oil Out of Clothes
Oil stains on clothing can occur in both children and adults. Bicycle or motorcycle lubricating stains are common in the pants, skirts, or socks. While the car engine oil stains are commonly found in any part of the clothing, most are obtained after repairing the vehicle engine. To overcome the oil stains on the shirt, you need two types of cleaning products, namely the type of powder products to absorb excess oil and type of liquid product to remove oil stains that have been already absorbed fabric fibers.
Products to remove oil stains on the shirt
Each type of product used to help remove oil stains on clothing has its own function. You may not need all the following stain cleaning supplies, depending on the condition of the stain you want to remove.
1. Powdered product
Selection:
- Baby powder
- Cornstarch
- Powder baking soda
The function of a powder-shaped product in the process of removing oil stains on the fabric is to absorb the oil that has just spilled or splashed on the shirt and is still wet. You should immediately sprinkle one of the fine powders on the oil stain that is still wet so that excess oil that has not seeped into the fabric fibers can be absorbed by the powder.
If you choose to wear powder, use only white powder. Colored powder risks leaving its own stain. If the oil stains on the shirt are dry, you do not need to use the powder-shaped product above, directly use the liquid product below.
2. The product is liquid
Selection:
- Liquid detergent
- Liquid dishwashing soap
- Shampoo
This liquid product that has an important role to destroy oil stains that are essentially an oil. Whether the oil stain on your clothes is still wet or dry, you absolutely need at least one liquid product to fight oil stains, whether it is still on the surface of the fabric or already absorbed fabric fibers.
How to remove the oil stains on the clothes
Pay attention to the condition of the oil stains on your clothes to adjust how to remove the oil on the right clothes without wasting time. If a new oil stain is formed and still wet, follow both sections of the following steps. If the oil stains have dried, immediately follow the steps of liquid product usage.
Use of powder products
- If the clothes are exposed to oil spills, absorb as much oil as possible with a cloth without expanding the affected area.
- While the stain is still wet, sprinkle baby powder, baking soda powder, or cornstarch on top of the oil stain. Adjust the thickness of the powder spray layer with the quantity of oil you want to absorb.
- Leave on for about 30 minutes or until the powder is not able to absorb excess oil.
- Get rid of the oil-mixed powder. Sprinkle new powder if there is still excess oil that needs to be absorbed.
Use of liquid products
- Dab liquid soap, shampoo, or dishwashing liquid soap on oil stains.
- Use a wet toothbrush to brush the part until it is bubbly. Continue for about 3 minutes while ensuring the liquid is absorbed until the fabric fibers.
- Perform step 2 on the back side of the stained fabric.
- Rinse and check if the stain is still visible. If still, soak the part in warm water mixed with liquid detergent for the night.